Flow Control Switch 10 Bar

Flow Control Switch 10 Bar

Automatic Water Pump Control Made Easy!

Tired of manually switching your water pump on and off? The Flow Control Switch 10 Bar (SKD-11) takes care of it for you!

Designed to automatically start and stop your water pump based on water demand, this handy controller makes managing your household water supply easier and more convenient.

When you open a tap, the controller detects a drop in water pressure and switches your pump on. Once you close the tap and water stops flowing, it automatically switches the pump off.

It also features built-in dry-run protection, helping protect your pump when there's not enough water available.

Whether you're boosting household water pressure, supplying water from a JoJo tank or running a garden irrigation system, the SKD-11 is a practical addition to a compatible water pumping setup.

Why You'll Love It

• Automatic Pump Control: Starts and stops your pump automatically when water is needed.

• No Manual Switching: Enjoy convenient water supply without constantly turning your pump on and off.

• Built-In Dry-Run Protection: Helps protect your pump from damage when the water supply runs low or runs out.

• 10 Bar Maximum Pressure: Designed for compatible pressurised water supply systems.

• 1.2 Bar Starting Pressure: Automatically starts your pump when system pressure drops to approximately 1.2 bar.

• Flow Monitoring: Detects water flow to help manage automatic pump operation.

• IP65 Protection: Provides protection against dust and water jets when correctly installed.

• 1¼″ BSP Connections: Suitable for compatible threaded plumbing installations.

• Versatile Applications: Ideal for household water supply, pressure boosting and compatible irrigation systems.

How Does It Work?

The SKD-11 Flow Control Switch monitors water pressure and flow to automatically control your pump.

1. Open a Tap

When you open a tap, water pressure in your system begins to drop. Once it reaches approximately 1.2 bar, the controller automatically starts your pump.

2. Water Flows

Your pump continues supplying water while there is demand, helping maintain a steady water supply throughout your system.

3. Close the Tap

When you close the tap and water flow stops, the controller automatically switches your pump off.

4. Water Runs Out

If the water supply becomes insufficient, the controller detects the shortage and stops the pump to help prevent dry-running damage.

It's an easy way to automate your water supply while adding an extra level of pump protection.

Ideal For

• Household Water Pressure Boosting: Automatically manage a pump supplying water to your home.

• JoJo Tank Water Supply: Control water delivery from a storage tank to your household plumbing.

• Domestic Water Pumps: Add automatic start and stop functionality to compatible pumps.

• Garden Irrigation: Conveniently control suitable irrigation pump systems.

• Water Transfer Systems: Automate compatible pressurised clean-water applications.

• Potable & Non-Potable Water Systems: Suitable for compatible drinking-water and general water supply installations.

Product Specifications

Specification	Details
Product Name	Flow Control Switch 10 Bar
Model	SKD-11
Product Type	Automatic Water Pump Flow Controller
Flow Range	0–15m³/h (0–15,000 L/h)
Rated Voltage	220V AC
Frequency	50Hz
Maximum Current	30A
Maximum Operating Pressure	10 Bar
Starting Pressure	1.2 Bar
Inlet Connection	1¼″ BSP
Outlet Connection	1¼″ BSP
Protection Rating	IP65
Pump Control	Automatic Start & Stop
Dry-Run Protection	Yes
Water Applications	Potable & Non-Potable Water

Built-In Protection for Your Pump

Running a water pump without enough water can cause unnecessary wear and damage.

The SKD-11 Flow Control Switch includes water-shortage detection that helps prevent your pump from running dry.

If the controller detects insufficient water, it stops pump operation to help protect the system.

This makes it especially useful for household water supply systems and tank-fed pumping installations where water availability may vary.

Important Installation Information

Before installing your Flow Control Switch, keep the following in mind:

• Pump Compatibility: Ensure your pump is compatible with the controller's electrical ratings and operating requirements.

• Maximum Pressure: The controller is rated for a maximum working pressure of 10 bar.

• Starting Pressure: The pump activates when system pressure drops to approximately 1.2 bar.

• Connections: Features 1¼″ BSP threaded inlet and outlet connections.

• Power Supply: Requires a suitable 220V AC, 50Hz electrical supply.

• Correct Installation: Install according to the manufacturer's instructions and indicated water flow direction.

• Water Supply: Dry-run protection helps prevent damage but does not replace the need for a reliable water source.

Please Note: The controller automatically manages pump operation but does not increase the maximum pressure your pump can produce. Actual water pressure depends on your pump's performance and plumbing system.

Make Your Water Supply Automatic!

Whether you're supplying water from a JoJo tank, boosting household pressure or managing a garden irrigation system, the Flow Control Switch 10 Bar makes everyday pump operation simpler.

With automatic start and stop control, built-in dry-run protection and a 10 bar maximum operating pressure, it's a convenient way to manage your water pump without constant manual switching.

Less hassle, easier pump control and a more convenient water supply!

Download Product Manual